Ogden Sr3702 5 Gallon
Plastic Drum Heater 120v 300 W Max Temp 392deg
USD $150.00
Condition : New – Open box
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Drum Heater 5 Gal Plastic 70/140F 300 Watts Ogden | Mfr# SR3702 |
Item# DO-29020-73 Retail Price: $473.00 Silicone rubber insulated drum heaters are constructed of silicone rubber reinforced Fiberglas® cloth laminated around resistance wire to provide flexible, moisture and chemical resistant heat. Drum heaters can withstand flexing without fear of premature failure. The SLDH heats the contents of the drum by convection. Heating will occur from the point where the heater is installed to the top of the drum. If the entire drum is to be heated, the SLDH should be installed as near to the bottom of the drum as possible. If only part of the material is to be heated, the drum heater should be installed around the center or top section of the drum. This will provide a faster heat-up and save energy. Care must be given to ensure that the material level in the drum never falls below the location of the heater. NOTE: Not for heating inflammable materials or for use in hazardous areas. NOTE: When a single heater is used, place the heater at the bottom of the drum to minimize stratification. FEATURESStandard products for 5, 15, 30 and 55 gallon drums Adjustable thermostats Chemical and moisture resistant Rugged and flexible Easy to store Internally grounded standard Complete; ready to install Heavy-duty spring attachment assembly Specifications Product Type Drum Heater Width (in.) 9.5 Min temperature (º F) 70 Max temperature (º C) 218 Watts 300 Min temperature (º C) 21 Power (VAC) 120 Drum Size (gal.) 5 Max temperature (º F) 425 Drum Type Plastic Model SR3702 Manufacturer number SR3702 Brand Ogden
Item# DO-29020-73 Retail Price: $473.00 Silicone rubber insulated drum heaters are constructed of silicone rubber reinforced Fiberglas® cloth laminated around resistance wire to provide flexible, moisture and chemical resistant heat. Drum heaters can withstand flexing without fear of premature failure. The SLDH heats the contents of the drum by convection. Heating will occur from the point where the heater is installed to the top of the drum. If the entire drum is to be heated, the SLDH should be installed as near to the bottom of the drum as possible. If only part of the material is to be heated, the drum heater should be installed around the center or top section of the drum. This will provide a faster heat-up and save energy. Care must be given to ensure that the material level in the drum never falls below the location of the heater. NOTE: Not for heating inflammable materials or for use in hazardous areas. NOTE: When a single heater is used, place the heater at the bottom of the drum to minimize stratification. FEATURES
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
