NEW! Morse Drum Hand Pump for Chlorinated Solvents, Acids, Xylene,

NEW! Morse Drum Hand Pump for Chlorinated Solvents, Acids, Xylene, 2000 SSU!! SHIPPING IS IN THE LOWE
Usually ships in 2- 5 days Drum Hand Pump, General Guide: Some Chlorinated Solvents, Acids, Aromatics, Xylene, Up To 2000 SSU
Morse manual drum and barrel pumps provide a controlled discharge rate of approximately 1 quart (.95 liter) on complete forward and backward cycle at 10 psi over 24 feet (7.3 m). They fit the NPT (National Pipe Thread) of the 2" (5 cm) bung on 55 or 30 gallon (208 or 114 liter) steel drum. Adaptors are also available to use Morse 55-gallon (208 liter) barrel pumps with the buttress thread of the 2" (5 cm) bung on your plastic barrels.

Suction lift tested for 15 feet (4.6 m) minimum

Discharge head up to 25 feet (7.3 m)

Output head pressure is up to 10.83 psi

1" (2.54 cm) NPT suction tube

3/4" (1.9 cm) NPT discharge tube

Two position drum pump handle

Handle can be mounted above the drum hand pump extending 20.5" (52 cm) above the bung when upright.

Mount handle below the drum hand pump for easier operation from below with the drum on a truck or platform.

Self-lubricating Polytetrafluoroethylene piston ring operates wet or dry for long life

Chemically compatible with liquids up to 120 F (49 C)

Handle viscosity up to 2,000 SSU (about as thick as 30 weight motor oil at room temperature). Handle effort increases as viscosity approaches this maximum.

Models 26, 271-AE and 27-4AV drum / barrel pumps are generally useful with compatible liquids in a mild acidity/alkalinity range of pH 4 to 9. Avoid stronger acids and caustics.

Models 28-5BV and 28-6BE drum / barrel pumps are useful in a wider pH range.

Many other chemical characteristics effect choice of barrel pump (see drum pump chart or chemical compatibility at morsedrum.com for specific fluids)

WBB806426 Product Specifications

BRAND Morse COMPATIBLE LIQUIDS Some Chlorinated Solvents; Acids; Aromatics, Xylene CONSTRUCTION Ryton DISCHARGE SPOUT DIAMETER INCHES 3/4" Cross Linked Polyethylene GASKET MATERIAL Viton MANUFACTURERS PART NUMBER 28-5BV SEAL CONSTRUCTION Viton SUCTION TUBE DIMENSION INCHES 1 Polytetrafluoroethylene TEMPERATURE RANGE DEGREES                                      F 120 THREAD INCHES 2 NPT TYPE Drum Hand Pump WEIGHT LBS 12

Returns Not Accepted